1 13

Evorie Moment

200mL學習水杯 (團購)

200mL學習水杯 (團購)

HK$124.00 HKD
HK$145.00 HKD HK$124.00 HKD
ลดราคา ขายหมดแล้ว
ค่าจัดส่งที่คำนวณในขั้นตอนการชำระเงิน
款式

Description

專為 6–12 個月寶寶設計，Evorie 200mL Tritan 學飲杯幫助寶寶從奶瓶餵食逐步過渡至自主喝水。作為第一階段學飲杯，幫助寶寶逐步熟悉吸管飲水方式，開始學習自主飲水。

Key Features

  • 專為 6–12 個月 寶寶學習自主喝水而設計。
  • 360° 重力球吸管，任何角度都能輕鬆喝水。
  • 十字防漏吸嘴，吸吮時才出水，幫助減少漏水。
  • 防漏設計，有效減少日常漏水情況。
  • 單向導氣閥，幫助吸飲更順暢、更舒適。
  • 採用優質 Eastman Tritan™，晶透清晰且耐摔耐用。
  • 6cm 寬口徑設計，裝水與清潔更方便。
  • 可使用洗碗機，並適用於蒸氣、UV 及煮沸消毒。
  • 可搭配 Evorie 360° 學飲杯杯蓋（另售）使用。
  • 提供可替換零件，延長水杯使用壽命。

Specifications

容量：200 mL / 7 oz
建議年齡：6–12 個月
耐熱溫度：-20°C 至 100°C

尺寸：
高度：15.3 cm
寬度：7 cm

材質：
杯身：改質PCT（Eastman Tritan™ ）
吸管及密封圈：矽膠
杯蓋及把手：聚丙烯（PP）
重力球：矽膠包覆不鏽鋼球芯

What's Included

1 × 200mL Tritan 學飲杯
1 × 重力球吸管組
1 × 杯蓋
1 × 把手
1 × 密封圈

Usage & Care

使用方法
- 首次使用前，請徹底清洗所有配件。
- 使用前請確認吸管、密封圈及杯蓋已正確安裝。
- 加入飲品後，請將杯蓋確實鎖緊。
- 重力球吸管可讓寶寶幾乎任何角度都能輕鬆喝水。
- 使用時請全程由成人陪同。

清潔與消毒
- 清潔前請先將所有零件拆卸。
- 使用溫水及嬰幼兒專用奶瓶清潔劑徹底清洗。
- 建議使用吸管刷清潔吸管及其他不易清潔的部位。
- 清洗後請徹底沖洗乾淨，並待所有零件完全乾燥後再重新組裝。
- 可使用洗碗機（上層）、蒸氣消毒、UV 消毒及煮沸消毒（最高 100°C）。

注意事項
- 本產品須於成人監護下使用。
- 每次使用前請檢查所有零件，如有磨損或損壞請立即更換。
- 使用前請確認所有零件已正確組裝，並將杯蓋確實鎖緊。
- 請定期檢查吸管及矽膠零件，如有磨損或損壞請立即更換。
- 建議每 1–2 個月 更換吸管組，如有磨損請提早更換，以維持最佳衛生與使用效能。
- 拆卸後請將所有小零件放置於兒童無法取得處。
- 請勿將本產品任何零件放入微波爐加熱。

ดูรายละเอียดทั้งหมด

FAQ

What age is the 200mL Sippy Cup suitable for?

Designed for babies aged 6–12 months who are learning to drink from a straw and transitioning from feeding bottles to independent drinking.

Can my child drink while lying down?

Yes. The weighted straw follows the liquid as the cup tilts, allowing your child to drink from different angles. For safe drinking, adult supervision is always recommended.

Does my child need to bite the straw tip?

No. Simply place the lips around the straw tip and sip normally. The cross-cut valve opens with suction and does not require biting.

What if my child can't get any water from the cup?

Make sure the straw and weighted ball are securely connected, the cross-cut valve is clean and not stuck together or blocked, and all parts are assembled correctly. Start with a small amount of water for practice.

Why does water sometimes rise or come out of the straw?

Liquid may rise through the straw when the pressure inside the cup becomes higher than the air pressure outside. This can occur with warm or cold drinks and is a normal result of pressure changes.

How can I reduce water from rising or coming out of the straw?

After filling the cup, gently pinch or press the “+” valve on the straw tip before tightening the lid to release excess pressure. If you notice water rising in the straw, slightly loosen the lid, then retighten it to help equalize the pressure inside and outside the cup.

Why is my sippy cup leaking?

Check that the cross-cut valve is intact, the sealing ring is properly fitted and sitting flat, the straw and weighted ball are securely connected, and the lid is securely tightened.

Can I use milk or warm drinks?

Follow the product instructions for suitable drinks and temperatures. Milk or warm drinks may build up pressure inside the sealed cup. After filling, release excess pressure through the “+” valve before securely closing the lid.

How often should I clean it, and how can it be sterilised?

Clean the cup after each use. Disassemble all removable parts, wash thoroughly, and allow them to dry completely. The cup is suitable for boiling, steam, and UV sterilisation.

Is it dishwasher safe?

Yes. This product is dishwasher safe. Top-rack placement is recommended to keep all parts away from the dishwasher’s heating element.

Is it normal for a small amount of liquid to remain at the bottom?

Yes. A small amount of liquid may remain when the cup is nearly empty. Gently tilt the cup to help the weighted straw reach the remaining liquid.

How can I reduce odours?

Clean all parts promptly after use, especially after milk or other beverages, and allow them to dry completely before reassembly or storage.