My Cart

Close

Product Care

Tritan Feeding Bottles

Evorie baby milk bottle open

Cleaning

• In order to ensure hygiene, please clean and sterilize all parts (except venting system tube) in boiling water for 5 minutes before first usage. Do ensure sufficient water when boiling to avoid damage to product.

 Please soak product in warm water immediately after use and use a bottle cleanser to clean thoroughly.

 Avoid using sharp objects to clean products. (may cause damage to product)

 

Sterilizing

 Nursing bottle can be sterilized in boiling water for 5 minutes after it has been cleaned completely.

 When boiling to sterilize, please ensure sufficient water in the pot; water levels should ideally be 2cm above the submerged product.

 Please use a wide and deep pot to allow space for movement during the boiling process and avoid contact with pot walls that can exceed 100°C in order to prevent damage to product.

• Please use sterilizing tongs to remove nursing bottle after water has cooled in order to prevent deforming of bottle caused by high temperatures.

 Please follow instructions of electrical steam sterilizer user manual for steam sterilizing.

 This nursing bottle cannot be sterilized using microwave. The temperature of product is very high after sterilizing, please be careful to avoid burns.

 

View feeding bottle manual here.

Tritan Water Bottles

Cleaning

 In order to ensure hygiene, please clean and sterilise all parts (except venting system tube) in boiling water for 5 minutes before first usage.

• Do ensure sufficient water when boiling to avoid damage to product. 

 Please soak product in warm water immediately after use and use a milk bottle cleanser to clean thoroughly.

 Avoid using sharp objects to clean product. (may cause damage to product)

 

Sterilizing

 Drinking cup can be sterilized in boiling water for 5 minutes after it has been cleaned completely.

 When boiling to sterilize, please ensure sufficient water in the pot; water levels should ideally be 2cm above the submerged product.

 Please use a wide and deep pot to allow space for movement during the boiling process and avoid contact with pot walls that can exceed 100°C in order to prevent damage to product.

 Please use sterilizing tongs to remove nursing bottle after water has cooled in order to prevent deforming of bottle caused by high temperatures.

 Boiling to sterilize not advised for venting system tube as tube might come into contact with walls of pot that are high in temperature, leading to deformities.

 Please follow instructions of electrical steam sterilizer user manual for steam sterilizing.

 This drinking cup cannot be sterilized using microwave.

 The temperature of product is very high after sterilising, please be careful to avoid burns.

 

View water bottle user manual here.

 

Feeding Bottle Teats

Cleaning

  For hygiene and safety considerations, before use be sure to wash and sterilize thoroughly following the instruction.

  Care should be taken to ensure there is sufficient water in the container to avoid damage to the product.

  Always wash your hands with soap before cleaning, sterilizing and feeding.

 

Sterilizing

  Be sure to sterilize before each use. After thoroughly washing the teat, completely submerge them in boiling water for 5 minutes to sterilize.

  When boiling and disinfecting, it should be noted that the amount of water must be sufficient, and the water level should cover all the products with a 2cm allowance.

  Use sterilization products specifically for nursing bottles and teats.

  When sterilizing, avoid prolonged contact with the edge of the pot or bottom, otherwise it may cause damage to the product.

  Please follow the instructions of the electronic steam sterilizer for steam sterilization. Do not sterilize this product in a microwave or under UV light.

  

View bottle teats user manual here.